The Skalar range of San++ samplers offers for each routine laboratory and application the perfect match saving operators time and errors. With the unique automatic standard preparation and over range dilution facility, high workloads are fully automatically analyzed outside working hours, without any operator supervision.
Skalar Samplers offer the highest degree of automation available today with:
The San++ Automated Wet Chemistry Analyzer also known as Continuous Flow Analyzer has been designed as a modular system to meet the needs of laboratories which process a few samples or large volumes of samples. Based on the Continuous Flow Analysis (CFA) or also called Segemented Flow Analysis (SFA) technique, up to 16 analytical measurements can be made on a single sample simultaneously. With the addition of rinsing valves and software the San++ system can automate; start-up, shut-down, dilutions, re-runs, clean-up, and raw data storage.
Skalar, the world leader in wet chemistry technology, offers over 300 proven applications utilizing various combinations of automatic dilutions, additions, mixing, heating, dialysis, extractions, distillation, digestion, phase-separation, hydrolysis, ion-exchange/reduction and more. Skalar has developed a proven systematic approach to provide a quality system starting with complete applications engineered on customer samples to provide the best possible configuration to the customer needs and requirements, training and installation by qualified specialists and complete application and service support.
The SA1100 and SA1150 samplers accommodate up to 2 x 50 sample positions, with built in rinse pump. Optionally, 10 dedicated standard positions are available for working standards. Furthermore, they can be equipped with a second needle for dual needle sample pick-up and extended sample positions (up to 100 positions). The samplers are random access and computer controlled, the SA 1150 sampler is extended with a soft keypad to run in or computer or manual control mode.
Computer controlled RØZ sampler, series 1050, for up to 140 samples with separated standard and QC sample positions, built in rinse pump, optional automatic diluter station for automatic pre- and post run dilutions, and automatic standard preparation, with optional dual sample pick up (SA 1053) and optional stirrer
Computer controlled XYZ sampler series 1074, for 300 samples, with separate positions for standards and QC samples, with container volumes of 35 mL. Build in rinsing pump. Optional automatic diluter station for automatic pre- and post run dilutions and automatic standard preparation, Extendable with 2 to 4 needles for simultaneous sample pick up with different matrices, with optional stirrer and automatic bar code reader and customized sampler container racks also available with larger footprint for more then 300 samples.
The SA1075 Random Access auto sampler carries standard 576 sample positions, divided over 6 racks of 96 samples each. In addition, there are 26 positions available in a separate tray for working standards, QC samples and drift control samples, with container volumes of 35 ml. Extendable with 2 to 4 needles for simultaneous sample pick up with different matrices. Optional automatic diluter station for automatic pre- and post run dilutions and automatic standard preparation.