You routinely purify your samples on an open glass column and have to cope with a limited resolution and a long separation time. As a first step towards automation, we offer two small systems: the “Easy Synthesis” and the “Easy Extract” systems allow you to control the flow rate and the eluent composition.
Optimized separation efficiency using gradient elution
Controlled separation with precise monitoring of eluent composition
Increased purity of the collected fractions
Time and money saving
Reduced elution time with controlled flow rate and solvent composition
Smaller fraction volume for a faster evaporation
Decreased purification cost due to lower solvent consumption
Cost effective initial investment with upgrade possibilities
Easy and safe
Intuitive control of pumping parameters
Minimized solvent exposure
Functional principle of the Sepacore® Easy Purification Systems
The use of two pump modules enables the formation of a binary gradient. The solvents enter the pump heads via the aspiration tubing (input) (solvent A and B). The FEP tubing guides the solvent to the mixing chamber with integrated pressure sensor and from there via the injection system on to the column via the pressure tubing (output). The Pump Manager C-615 regulates the flow rate of the pump modules 1 and 2 and monitors the current pressure. The maximum pressure for Pump Module C-601 is 10 bar (145 psi) and for Pump Module C-605 50 bar (725 psi). In addition, a variety of programs and settings enables the selection of flow rate, pressure, time and gradient of the solvents.